Dynex hydraulics at the Offshore Technology Conference
  Home
  Site Map
  Products
  Power Units
  Search for Distributors
  Company Profile
  Contact Dynex
  Literature
   

Dynex water glycol pumps for the petroleum industry
Products for the
Oil & Gas Industry

 

 
 

 

  Dynex at Brasil Offshore 2007

Dynex Hydraulic Pumps at OE 2007

Offshore Europe attracted over 30,000 visitors to see the newest technologies for the oil and gas industry. Products and services from 1400 companies were on display.

Thanks to everyone who visited Dynex stand 887 at the show!

Pumps for Wellhead Control Systems

The Dynex exhibit featured high-pressure pumps that operate to 15 000 psi (1040 bar).

Water-glycol pumps facilitate lower maintenance and installation costs on unmanned platforms. This single-fluid pump design does not require a separate lubrication circuit and eliminates possible cross contamination.

Low input power mineral oil pumps, requiring only 1 HP at 10 000 psi (0,7 kW at 700 bar), are used for solar or wind-powered panel sysems.

The pumps' compact size also makes them ideal for portable torque-tool power units.

Oil & Gas Applications

Dynex products have been successfully used on:

  • Wellhead Safety Control Systems
  • Subsea Water Glycol Systems
  • Safety Control Panel Systems
  • Portable Tool Power Packs
  • Systems for Use in Hazardous Areas

Learn more about Dynex pumps and valves for the Oil and Gas Industry.

  

Dynex hydraulic products at OTC 2003

 

Need More Information on Dynex Products?

Do you have questions about our products? Need more detailed information? Tell us about your requirements and we will show you how our products can benefit your application. Contact Dynex

Hydraulic pumps for water glycol eliminate cross-fluid contamintion

Water glycol pumps use the pumped fluid for internal bearing lubrication. This single-fluid design eliminates fluid cross-contamination, which may occur in other pump designs requiring oil for lubrication. Simple installation and low-maintenance lowers system costs.

Learn more about water glycol pumps.

  

 

Dynex PF500 pumps require low input power requiirements

PF500 Series pumps require input power requirements as low as 1.0 HP at 10 000 psi (0.7 kW at 700 bar) and 1800 rpm. This makes these mineral-oil pumps ideal for solar or wind-powered wellhead control panel systems.

Learn more about mineral oil pumps.

Dynex/Rivett Inc.
Pewaukee, WI  USA
Ashland, MA USA
Eaton Socon, Cambs. UK

     Dynex logo
Home | Site Map | Product Index | Power Units | Find a Distributor | Company Profile | Contact Dynex | Literature

Copyright © 2007 - DYNEX/RIVETT INC.