High Pressure Hydraulic Power Units from Dynex

Download Power Unit Overview

Custom Hydraulic
Power Units

Power Unit Applications

ORDERING
POWER UNITS:

Download Literature
(PDF format) for Hydraulic Power Units

Quotation Form
for a quote on a Custom Hydraulic System

Contact the
Power Unit Facility
(Ashland, Massachusetts, U.S.A.)

Dynex hydraulic power units for high pressure and special fluids

Standard or Specialized Power Units for
High Pressure and Special Fluids

Select from a wide range of standard hydraulic power units. Systems are available for pressures from 3000 to 15 000 psi (210 to 1400 bar), with flows to 200 gpm (757 L/min).

Specify units for operation with various fluids: standard mineral-oil or low-lubricity fire-resistant and water-based fluids, including water glycol, Skydrol, other phosphate ester fluids, and various military fluids.

Specialized systems with custom fabrication are made to meet specific customer requirements. These custom power units can be built for high pressure operation to 15 000 psi (1040 bar).

Dynex hydraulic systems have been used worldwide for over 45 years in a wide range of indusrial and mobile applications.

See the Standard Selection Table below.

NFPA and JIC Standard Hydraulic Power Units

The Dynex power unit facility employs 3D CAD design and manufacturing techniques that adhere to NFPA and JIC guidelines.

Plasma cutting and MIG and TIG welding are used to assure quality fabrication. Custom tube-bending equipment can handle up to 1.5 inch (38,1 mm) diameter stainless steel.

Systems with Expert
High-Pressure Piping

Skilled workers with experience piping for high-pressure systems assure trouble-free operation. Port connection options include NPT, SAE, flange, socket weld, coned and threaded (Autoclave or Butech) and BSP (British Standard Pipe) fittings.

These power units provide long service-life and reduced maintenance with the use of metal tubing and custom bends where suitable. Stainless steel reservoirs, tubing and fittings can also be incorporated.

High pressure 10000 psi power units for special fluids

Hydraulic power units include high pressure HPVT Series, which operate to 10 000 psi (700 bar). These units are suitable for mineral oil, water glycol, Skydrol or other phosphate ester fluids. Because many conditions affect operation, review your special fluid application with the power unit sales department.

	Custom Systems
	Custom power units are made to meet exact customer specifications. Systems can operate to 15 000 psi (1040 bar) with reservoirs to 500 gallons (1893 L) and prime movers to 700 HP (522 kW). Learn more about custom systems.

Dynex power unit facility

Power unit fabrication is done at the Dynex Power Unit Facility in Ashland, Massachusetts, U.S.A.

Standard Hydraulic Power Unit Features

Reservoir sizes from 3 to 500 U.S. gallons (11 to 1893 L).
Flows from .22 to 200 gpm (0,83 to 757 L/min).
Maximum pressures from 3000 to 15 000 psi (210 to 1040 bar).
Electric motors from .25 to 75 HP (0,2 to 56 kW).
Incorporate customer-specified and distributor-supplied components.
Optional stainless steel construction provides corrosion resistance.
Power units finishes include enamel (Dynex blue, vista green or beige) or epoxy (machine-tool gray, light gray or beige).
Units are tested for proper flow, pressure and valve function.

Selection Table

The table shows a range of reservoirs, motors and pumps available for each Standard Power Unit Series.
The pump type can be customer-specified for most power units. Output is then determined by the pump selected.
Click on the appropriate link below for more information on standard features and options for each power unit series.

Reservoir Capacity		Electric Motor Power		Pump Type	Pump Output at 1800 rpm		Maximum Pressure
U.S. Gallons	Liters	HP	kW	Pump Type	U.S. gpm	L/min	psi	bar

VT Series - Vertical Tank (more information)
5 - 35	19 - 114	.25 - 5	0,2 - 3,7	Gear Pump	.5 - 6.5	1.9 - 24,6	3000	210

HPVT Series - High Pressure Vertical Tank (more information)
3 - 5	11 - 19	2 - 5	1,5 - 3,7	Checkball Pump	.22 - .70	0,83 - 2,65	10 000	700

JIC Series - Horizontal Tank (more information)
10 - 500	38 - 1893	1 - 75	0,8 - 56	Customer Specified	–	–	5000	350

DWCE Series - Economy Horizontal Tank (more information)
10 - 80	38 - 303	1 - 75	0,8 - 56	Customer Specified	–	–	5000	350

RA Series - Right Angle Tank (more information)
10 - 300	38 - 1136	1 - 75	0,8 - 56	Customer Specified	–	–	5000	350

Learn About Dynex Custom Hydraulic Power Units

Dynex/Rivett Inc.
Pewaukee, WI USA
Ashland, MA USA
Eaton Socon, Cambs. UK

Home | Site Map | Product Index | Power Units | Find a Distributor | About Dynex | Contact Dynex | Literature | Careers

Copyright © 2012 - DYNEX/RIVETT INC.