Dynex Standard Power Unit Specifications

Standard Power Unit Specifications Dynex builds a wide range of standard hydraulic power units. Select from five tank styles with a choice of pumps, valves, electric motors, filters, coolers, controls and accessories. For complete ordering information, including dimensions and model code, download the specification sheet for each power unit series.

VT SERIES – VERTICAL TANK STYLE
Specifications Reservoir Capacity: 5 to 35 U.S. gallons (19 to 114 L) Electric Motor: .25 to 5 HP (0,2 to 3,7 kW) Gear Pump, Output: .5 to 6.5 US gpm (1,9 to 24,6 L/min) Maximum Pressure: 3000 psi (210 bar)
Standard Features Magnetic drain plug Filler, breather, dipstick Flexible motor coupling Machined motor/pump bracket Removable top cover Standard enamel external paint		Download literature (PDF format)
Options Suction strainer, pressure gage, relief valve, return filter, pressure filter, heat exchanger, accumulator, immersion heater

HPVT SERIES – HIGH PRESSURE VERTICAL TANK STYLE
Specifications Reservoir Capacity: 3 or 5 U.S. gallons (11 or 19 L) Electric Motor: 2 to 5 HP (1,5 to 3,7 kW) Checkball Pump, Output: .22 to .70 US gpm (0,83 to 2,65 L/min). Contact the Dynex sales department for operating recommendations for use with water glycol, phosphate ester and other special fluids. Maximum Pressure: 10 000 psi (700 bar)
Standard Features Dynex 10 000 psi components: PF500 checkball pump HP03 directional valve VSW sandwich relief valve Compact size: 14.5" (368mm) L x 12.5" (318mm) W x 21.5" (546mm) H Low weight: 95 lb (43 kg), 3 U.S. gallon (11,4 L) unit with full reservoir Quiet operation Close-coupled motor/pump assembly Removable top cover Magnetic drain plug Filler/breather and sight gage Standard enamel exterior paint		Download literature (PDF format)
Options Suction strainer, pressure gage, needle valve, ball valve, check valve, relief valve, return filter, pressure filter, accumulator, motor starter, full enclosure, drip pan

DWC SERIES – JIC HORIZONTAL TANK STYLE DWCE SERIES – ECONOMY HORIZONTAL TANK STYLE
Specifications Reservoir Capacity: JIC (DWC) - 10 to 500 U.S. Gallons (38 to 1893 L) Economy (DWCE) - 10 to 100 U.S. Gallons (38 to 379 L) Electric Motor: 1 to 75 HP (0,8 to 56 kW) Pump type specified by customer Maximum Pressure: 5000 psi (350 bar)
Standard Features Select from Dynex directional valves in sizes from D03 to D08H Conforms to JIC standards Cleanout cover located on end Reservoir with "V" Bottom and full baffle Oil sight gage with thermometer Filler/Breather Standard enamel exterior paint		Download literature (PDF format)
Options Suction strainer, top service cover, pressure gage, needle valve, ball valve, check valve, relief valve, return filter, pressure filter, accumulator, motor starter, full enclosure, drip pan

DHL SERIES – RIGHT ANGLE TANK STYLE
Specifications Reservoir Capacity: 10 to 300 U.S. Gallons (38 to 1136 L) Electric Motor: 1 to 75 HP (0,8 to 56 kW) Pump type specified by customer Maximum Pressure: 5000 psi (350 bar)
Standard Features Select from Dynex directional valves in sizes from D03 to D08H Flooded suction design Two full baffles on larger reservoirs Full access hinged top cover Magnetic drain plug Level gage with thermometer Filler/Breather Standard enamel exterior paint Single side equipment base		Download literature (PDF format)
Options Suction strainer, pressure gage, needle valve, ball valve, check valve, relief valve, return filter, pressure filter, accumulator, motor starter, full enclosure, drip pan

Learn About Custom System Capability

Dynex/Rivett Inc.
Pewaukee, WI USA
Ashland, MA USA
Eaton Socon, Cambs. UK