PF1000 Series Pumps
DYNEX PF1000 SERIES FIXED DISPLACEMENT CHECKBALL PUMPS
1.5 to 4.1 gpm (5,7 to 15,5 L/min) at 1800 rpm
6000 psi (420 bar) – 10 000 psi (700 bar)
- Bi-directional rotation providing constant flow direction regardless of drive shaft rotation.
- Shaft Options: Standard keyed, Optional spline.
- Seal Options: Standard Fluorocarbon, Optional EPR seals for use with some phosphate ester fluids, or Fluorocarbon with high pressure shaft seal.
- Split-Flow® models can supply multiple, independent flows from one pump! Multiple flows are achieved by combining the output of individual pistons in various combinations (up to one outlet per piston). This pump has 4 pistons.
Product Specifications
| Pump Models ① | Flow at 1500 rpm ② U.S. gpm | L/min | Flow at 1800 rpm ② U.S. gpm | L/min | Rated Pressure psi | bar | Max. Pressure psi | bar | Speed rpm Rated | Max. | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| SAE Outlet Port: | ||||||||||
| PF1002-10 | 1.3 | 4,9 | 1.5 | 5,7 | 6000 | 420 | 8000 | 560 | 1800 | 3600 |
| PF1003-10 | 1.8 | 6,8 | 2.1 | 7,9 | 6000 | 420 | 8000 | 560 | 1800 | 3600 |
| PF1004-10 | 2.2 | 8,3 | 2.6 | 9,8 | 6000 | 420 | 8000 | 560 | 1800 | 3600 |
| PF1005-10 | 2.9 | 11,0 | 3.5 | 13,2 | 6000 | 420 | 8000 | 560 | 1800 | 2800 |
| PF1006-10 | 3.4 | 12,9 | 4.1 | 15,5 | 6000 | 420 | 8000 | 560 | 1800 | 2800 |
| Autoclave/Butech or British Standard Pipe Parallel Outlet Port ③: | ||||||||||
| PF1002H-10 | 1.3 | 4,9 | 1.5 | 5,7 | 6000 | 420 | 10 000 | 700 | 1800 | 3600 |
| PF1003H-10 | 1.8 | 6,6 | 2.1 | 7,9 | 6000 | 420 | 10 000 | 700 | 1800 | 3600 |
| PF1004H-10 | 2.2 | 8,3 | 2.6 | 9,8 | 6000 | 420 | 10 000 | 700 | 1800 | 3600 |
| PF1005H-10 | 2.9 | 11,0 | 3.5 | 13,2 | 6000 | 420 | 10 000 | 700 | 1800 | 2800 |
| PF1006H-10 | 3.4 | 12,9 | 4.1 | 15,5 | 6000 | 420 | 10 000 | 700 | 1800 | 2800 |
Pump Selection Notes
- Output flow based on typical performance at rated pressure (ISO 32 oil at 120° F).
- Ratings for keyed shaft only. Refer to “SAE A Spline Shaft” table on page 3 of Engineering Specifications for spline shaft pressure ratings.
- Contact the Sales department for applications requiring operation above rated speed. High speed operation may require a pressurized inlet. Refer to “ Minimum Inlet Conditions” table on page 2 of Engineering Specifications.
Literature
PF1000 Series Pumps - Engineering Specifications
1 file(s) 896.48 KB
Fluid Recommendations and Port Specifications
1 file(s) 141.47 KB
Dynex Pump & Valve Guide
1 file(s) 16.38 MB
3D Model
PF1000-4X-11
1 file(s) 4.05 MB
PF1000-11
1 file(s) 4.07 MB
PF1000-22-11
1 file(s) 4.05 MB
PF1000-31-11
1 file(s) 4.12 MB
PF1000-S-4X-11
1 file(s) 4.17 MB
PF1000-S-11
1 file(s) 4.11 MB
PF1000-S-22-11
1 file(s) 4.17 MB
PF1000-S-31-11
1 file(s) 4.15 MB
PF1000H-A-4X-11
1 file(s) 4.04 MB
PF1000H-A-11
1 file(s) 4.03 MB
PF1000H-A-22-11
1 file(s) 4.04 MB
PF1000H-A-31-11
1 file(s) 4.11 MB
PF1000H-B-4X-11
1 file(s) 4.01 MB
PF1000H-B-11
1 file(s) 4.05 MB
PF1000H-B-22-11
1 file(s) 4.03 MB
PF1000H-B-31-11
1 file(s) 4.09 MB
PF1000H-SA-4X-11
1 file(s) 4.16 MB
PF1000H-SA-11
1 file(s) 4.10 MB
PF1000H-SA-22-11
1 file(s) 4.15 MB
PF1000H-SA-31-11
1 file(s) 4.15 MB
PF1000H-SB-4X-11
1 file(s) 4.12 MB
PF1000H-SB-11
1 file(s) 4.09 MB
PF1000H-SB-22-11
1 file(s) 4.15 MB
PF1000H-SB-31-11
1 file(s) 4.13 MB
Service Information
Checkball Pumps Service, Installation and Operating Instructions
1 file(s) 471.01 KB
PF1000-10 Pumps, Service Parts List
1 file(s) 166.27 KB
PF1000-10 Pumps, Support Document
1 file(s) 207.18 KB
Reviews
There are no reviews yet.