PF6000 Series Pumps

DYNEX PF6000 SERIES FIXED DISPLACEMENT CHECKBALL PUMPS

Flow: 12.7 to 54 gpm (48 to 204,4 L/min) at 1800 rpm
Rated: 5 500 psi (380 bar) – 15 000 psi (1040 bar)
Maximum: 5 500 psi (1380 bar) – 15 000 psi (1040 bar)

  • Contamination tolerant, for operation in dirty environments.
  • Bi-directional rotation providing constant flow direction regardless of drive shaft rotation.
  • Shaft Options: Standard keyed, Optional spline.
  • Seal Options: Standard Fluorocarbon with high-pressure shaft seal.
  • Split-Flow® models can supply independent flows from up to ten separate outlets.
Pump ModelsFlow at 1500 rpm
U.S. gpm | L/min
Flow at 1800 rpm
U.S. gpm | L/min
Rated Pressure
psi | bar
Max. Intermittent Pressure
(psi)
Max. Intermittent Pressure
(bar)
Rated Speed
(rpm)
Max. Speed
(rpm)
Outlet Block Kit with Autoclave/Butech Port Required:
PF6023-316710.540,012.748,015 000104015 000104018001800
Outlet Block Kit with S.A.E., Autoclave/Butech or British Standard Pipe Port Required:
PF6033-316918.369,322.083,210 00070010 00070018001800
PF6046-317426.098,731.3118,48000560800056018001800
Standard S.A.E. 4-Bolt Flange Inlet and Outlet Ports:
PF6054-294629.5111,635.4134,06000420600042018002400
PF6070-318639.6150,147.6180,16000420600042018002300
PF6080-298945.0170,354.0204,45500380550038018002200

Pump Selection Notes

  1. Ordering these pumps requires a complete model code specifying seal and port options. Please refer to product literature for complete specifications.
  2. Output flows are based on typical performance at rated pressure with pressurized inlet where required.
  3. Models with the high pressure “H” option require the use of outlet port “A” (Autoclave/Butech fitting) or “B” (British Standard Pipe fitting). Pumps with ports for standard S.A.E. fittings are not recommended for operation above 8000 psi (560 bar). Contact the fitting manufacturer for the pressure rating of the fitting.

PF500 Series – Checkball Piston Pumps – Engineering specifications.

Pump Application Guide – An overview of the advantages of checkball pump design in mobile, industrial and marine applications.

Checkball Pumps Service, Installation and Operating Instructions.

Checkball Pumps (all) – Complete specifications for all models.

PF6023-6033-6046 Full-Flow, 1.75″ (44,45mm) Keyed Shaft, Inlet: 2-1/2″ S.A.E. 4-bolt, Outlet: Block Required

PF6054-6086-6089 Full-Flow, 1.75″ (44,45mm) Keyed Shaft, Inlet: 2-1/2″ S.A.E. 4-bolt, Outlet: 1″ S.A.E., 4-Bolt Flange

PF6023-6033-6046 Outlet Block No. 16 S.A.E.

Inside Checkball Pump Video Screenshot

Inside the Checkball Hydraulic Pump:
Design and Operating Advantages

An introduction to Dynex checkball hydraulic pumps and their unique design which allows them to operate reliably with a wide range of fluids at high pressures.

Split-Flow Pump Video Screenshot

Split-Flow Hydraulic Pumps for Simplified Circuits

Learn how Dynex hydraulic pumps, with Split-Flow technology, can simplify multiple-function hydraulic systems. With their ability to provide multiple flows from one pump, multiple pumps in a system can be replaced by one Dynex multiple-outlet pump.