PV4000-11 Series Pressure Compensated Pumps
DYNEX PV4000 SERIES PRESSURE COMPENSATED CHECKBALL PUMPS
7.3 to 13.7 gpm (27,6 to 51,9 L/min) at 1800 rpm
Rated: 6 000 psi (420 bar), Maximum: 10 000 psi (700 bar)
- Integral pressure compensation for energy efficient performance.
- Contamination tolerant, for operation in dirty environments.
- A wide range of fluid compatibility, for reliable operation with low-lubricity, low viscosity fluids.
- Shaft Options: Standard keyed.
- Seal Options: Standard Nitrile. Optional Fluorocarbon, or Optional EPR seals for use with some phosphate ester fluids.
Product Specifications
| Pump Models ①④⑤ | Theoretical Displacement CI/Rev | CC/Rev | Flow at 1500 rpm② U.S. gpm | L/min | Flow at 1800 rpm② U.S. gpm | L/min | Rated Pressure psi | bar | Max. Pressure③ psi | bar | Speed rpm Rated | Max. | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard Models: | ||||||||||||
| PV4011-11 | 1.136 | 18.62 | 6.1 | 23,1 | 7.3 | 27,6 | 6000 | 420 | 8000 | 560 | 1800 | 1800 |
| PV4016-11 | 1.605 | 26.30 | 8.9 | 33,7 | 10.7 | 40,5 | 6000 | 420 | 8000 | 560 | 1800 | 1800 |
| PV4018-11 | 1.796 | 29.41 | 10.0 | 37,9 | 12.0 | 45,4 | 6000 | 420 | 8000 | 560 | 1800 | 1800 |
| PV4020-11 | 2.022 | 33.13 | 11.4 | 43,2 | 13.7 | 51,9 | 6000 | 420 | 8000 | 560 | 1800 | 1800 |
| High Pressure Models: | ||||||||||||
| PV4011H-11 | 1.136 | 18.62 | 5.8 | 22,0 | 7.0 | 26,5 | 6000 | 420 | 10000 | 700 | 1800 | 1800 |
| PV4016H-11 | 1.605 | 26.30 | 8.6 | 32,6 | 10.3 | 39,0 | 6000 | 420 | 10000 | 700 | 1800 | 1800 |
| PV4018H-11 | 1.796 | 29.41 | 9.7 | 36,7 | 11.6 | 43,9 | 6000 | 420 | 10000 | 700 | 1800 | 1800 |
| PV4020H-11 | 2.022 | 33.13 | 11.0 | 41,6 | 13.2 | 50,0 | 6000 | 420 | 10000 | 700 | 1800 | 1800 |
Pump Selection Notes
- Please refer to product literature for complete specifications including seal and port options.
- Output flows are based on typical performance at rated pressure with pressurized inlet where required.
- High pressure models require the use of outlet port “A” (Autoclave/Butech fitting) or “B” (British Standard Pipe Parallel fitting). Pumps with ports for standard SAE fittings are not recommended for operation above 8000 psi (560 bar). Pumps with ports for BSPP fittings are not recommended for operation above 10 000 psi (700 bar). Contact the fitting manufacturer for the pressure rating of the fitting.
- These pumps are not bi-directional. Rotation must be specified, viewed from the shaft end.
- Electrohydraulic remote control can be achieved using a Dynex Remote Proportional Actuator (RPA) to stroke the volume control stem.
Literature
PV4000-11 Series Variable Delivery Pumps - Engineering Specifications
1 file(s) 1.09 MB
Fluid Recommendations and Port Specifications
1 file(s) 141.47 KB
Dynex Pump & Valve Guide
1 file(s) 16.38 MB
Checkball Pumps Service, Installation and Operating Instructions
1 file(s) 471.01 KB
3D Model
PV4000-11 Pump - Pressure Compensated
1 file(s) 3.12 MB
PV4000-11 Pump - Pressure Compensated, Handwheel
1 file(s) 2.88 MB
PV4000-11 Pump - Pressure Compensated, RPA
1 file(s) 9.36 MB
Videos
Inside the Checkball Hydraulic Pump:
Design and Operating Advantages
An introduction to Dynex checkball hydraulic pumps and their unique design which allows them to operate reliably with a wide range of fluids at high pressures.
Split-Flow Hydraulic Pumps for Simplified Circuits
Learn how Dynex hydraulic pumps, with Split-Flow technology, can simplify multiple-function hydraulic systems. With their ability to provide multiple flows from one pump, multiple pumps in a system can be replaced by one Dynex multiple-outlet pump.
Service Information
PV4000-11 Pumps, Service Parts List
1 file(s) 422.38 KB
Reviews
There are no reviews yet.