PV4026/4033 Series Pressure Compensated Pumps

DYNEX PV4000 SERIES PRESSURE COMPENSATED CHECKBALL PUMPS

12.0 to 22.4 gpm (45,4 to 84,8 L/min) at 1800 rpm
Rated: 4 000 psi (280 bar), Maximum: 8 500 psi (590 bar)

  • Integral pressure compensation for energy efficient performance.
  • Contamination tolerant, for operation in dirty environments.
  • A wide range of fluid compatibility, for reliable operation with low-lubricity, low viscosity fluids.
  • Shaft Options: Standard keyed.
  • Seal Options: Standard Nitrile. Optional Fluorocarbon, or Optional EPR seals for use with some phosphate ester fluids.
  • Contact Us
  • Interested in a Custom Solution?
  • Request a Quote
  • View the Dynex YouTube channel


Product Specifications

Pump Models ①④Flow at 1500 rpm ②
U.S. gpm | L/min
Flow at 1800 rpm ②
U.S. gpm | L/min
Rated Pressure
psi | bar
Max. Pressure ③
psi | bar
Speed rpm
Rated | Max.
Pressure Compensated with Volume Stem Control:
PV402614.755,617.666,64000280600042018001800
PV403318.770,822.484,84000280600042018001800

Pump Selection Notes

  1. Please refer to product literature for complete specifications including seal and port options.
  2. Output flows are based on typical performance at rated pressure with pressurized inlet where required.
  3. High pressure models require the use of outlet port “A” (Autoclave/Butech fitting) or “B” (British Standard Pipe Parallel fitting). Pumps with ports for standard SAE fittings are not recommended for operation above 8000 psi (560 bar). Pumps with ports for BSPP fittings are not recommended for operation above 10 000 psi (700 bar). Contact the fitting manufacturer for the pressure rating of the fitting.
  4. These pumps are not bi-directional. Rotation must be specified, viewed from the shaft end. Pressure control must be “full flow out” only.

Literature

3D Model

Videos

Inside the Checkball Hydraulic Pump:
Design and Operating Advantages

An introduction to Dynex checkball hydraulic pumps and their unique design which allows them to operate reliably with a wide range of fluids at high pressures.


 

Split-Flow Hydraulic Pumps for Simplified Circuits

Learn how Dynex hydraulic pumps, with Split-Flow technology, can simplify multiple-function hydraulic systems. With their ability to provide multiple flows from one pump, multiple pumps in a system can be replaced by one Dynex multiple-outlet pump.

Reviews

There are no reviews yet.

Be the first to review “PV4026/4033 Series Pressure Compensated Pumps”

Your email address will not be published. Required fields are marked *

Related Products…