Dynex News

H8819 Proportional Relief Valve

New H8819 Proportional Relief Valves – 15,000 psi at 50 gpm

By Dynex Sales / August 3, 2017
Posted in

Dynex is once again pushing the limits of high pressure hydraulics with this new series of high pressure/high flow relief valves. This series is designed to control pressures that exceed the capabilities of traditional relief valves. In fact, with some of the highest pressure & flow ranges available on the market, this product is quite unique. Check out these specs: Rated to 50 GPM at 15,000 PSI (190 l/min. at 1040 bar),or 75 GPM at 9,000 PSI (284 l/min. at 620 bar). Available with manual, electric vent or proportional control.

These valves are compatible with conventional, low-viscosity, and other special hydraulic fluids including military, and other phosphate ester fluids.
This makes them ideal for use on development or production test-stands, aerospace ground support equipment, and other applications requiring special fluids.

Learn more & download literature here.

PV4000 Series Pressure Compensated Pump

New PV4000-11 Design Pump – 10,000 psi, Pressure Compensation

By Dynex Sales / June 29, 2017
Posted in

The new PV4000-11 design pump offers variable output flow with 10,000 psi capability. Models are available with pressure compensation and electrohydraulic pump control to regulate delivery. These pumps are perfect for use on test stands, aircraft ground support equipment, hydraulic presses and other critical, high-pressure systems.

This new design offers longer life when using with low-lubricity fluids. The contamination tolerant design offers an advantage on applications where system fluid cannot be totally cleaned by filtration, or where complete filtration is just not economical.

Learn more & download literature here.

Dynex Booth OTC 2017

OTC 2017 Wrap-up

By Dynex Sales / May 16, 2017
Posted in

We’d like to thank all of those who visited our booth at the Offshore Technology Conference in Houston – May 1-4, 2017. We enjoyed meeting our customers in person and were thrilled to make many new acquaintances.

The Oil & Gas industry is one of our strategic markets and we’ve developed many custom products used on projects throughout world.

Feel free to contact us or sign up to receive our latest news via email. Thanks again and we’ll see you online!

See us at OTC2017 Booth 601

See us at OTC 2017

By Dynex Sales / March 23, 2017
Posted in

Once again Dynex pumps for wellhead control and other hydraulic requirements will be on display in Booth 601 at The Offshore Technology Conference.

Dynex products have been successfully used on: Wellhead Control Systems, Subsea Water Glycol Systems, Land-based Control Panel Systems, Portable Tool Power Packs.

Meet us to discuss your exact needs and let’s talk about the possibility of us developing custom products that meet your specific design requirements.

OTC SCHEDULE:
May 1-4 2017 NRG Park – Houston, Texas U.S.A.

Visit the OTC website for show registration and trip planning.

Dynex Welcomes Dan Lazic as Our Newest Regional Sales Representative

By Dynex Sales / February 28, 2017
Posted in

We are pleased to announce that Dan Lazic has joined Dynex as a Regional Sales Representative. Dan has a strong background in selling hydraulic products & systems. He will bring this knowledge and experience to our customer base to provide the trusted service they’ve come to expect from Dynex. Dan will identify opportunities to expand the use of Dynex products and work with those seeking custom tailored solutions.

Please join us in welcoming Dan to the Dynex sales team.

Dynex HP05H High Pressure Directional Control Valve

NEW HP05H Valve offers high pressure and high flow

By Dynex Sales / February 3, 2017
Posted in

Introducing the latest addition to the Dynex line of hydraulic directional control valves. The HP05H valve combines high pressure capabilities with higher flow capacities than HP03 or HP05 valves.

  • Rated Pressure: 8 500 psi (210 bar)
  • Nominal Flow: 30 gpm (114 L/min)
  • Max Flow: 40 gpm (151 L/min)
  • Actuator Options include: Direct Solenoid; Hydraulic Piloted; Air Piloted.
  • Full range of Spool types, Actuators, Electrical connections and Solenoid options.

Typical applications include presses and component test stands. With its high pressure and high flow capability this valve complements our unique checkball design pumps that set the standard for long life at high pressures.

Learn More

Follow Us on Twitter

Follow Dynex on Twitter

By Dynex Sales / August 18, 2016
Posted in

Dynex is proud to announce our new Twitter feed. So, in addition to our News Section which you can read on our website, or follow via RSS feed, you can now add us to your Twitter stream.

If you don’t use Twitter, we encourage you to look into it to and see what you’re missing. Twitter is rapidly becoming the ‘go-to’ destination to find all the latest up-to-the-minute developments in industry news.

Our Twitter handle is @DynexHydraulics.

PF500-LT Series Cold Weather Pumps

A hydraulic pump designed for operation down to -58ºF (-50ºC)

By Dynex Sales / August 12, 2016
Posted in

Temperature extremes encountered in cold or high-altitude environments can pose big challenges to hydraulic systems. Low temperatures can cause hydraulic fluids to increase in viscosity and lead to damaging cavitation and seal problems.

The unique checkball pump design is inherently resistant to cavitation. Dynex can configure these pumps with seal and bearing packages specifically tailored to fluid requirements and operating temperatures.

With high pressure capability and power requirements as low as 1.0HP at 10 000 psi (0,75kW at 700 bar), these compact & reliable pumps are ideal for wellhead control panel systems located in harsh environments.

Berendsen Fluid Power

Berendsen Fluid Power becomes a Dynex distributor in Arkansas

By Dynex Sales / May 25, 2016
Posted in

We are pleased to announce that Berendsen Fluid Power is now a distributor of Dynex hydraulic pumps, motors, and valves in the state of Arkansas .

Berendsen Fluid Power is one of North America’s largest distributors of hydraulic and pneumatic products and services. With over 400 employees in more than 45 different cities, distribution centers located in Atlanta and Toronto, their customer response representatives are ready to assist you with your fluid power needs.

Berendsen also offers a remanufactured components program, warranty repairs, & expert field service & installation.

Visit the Berendsen website.

Dynex at OTC 2016

News from OTC 2016

By Dynex Sales / May 16, 2016
Posted in

Now that Offshore Technology Conference 2016 is behind us and we’ve had a chance to unpack and get back to the office, we thought we’d share a bit about the event.

Due to the oil price slump, not surprisingly, attendance at this year’s conference was lower than in previous years – still more than 68,000 attendees from 120 countries gathered to learn about new technology, share ideas, and develop business relationships.

This year Dynex showcased its pumps for wellhead control systems and panel systems. We also introduced our new QuickPack hydraulic power unit line. These compact, low-horsepower units are capable of providing up to 10,000 psi (700 bar).

If you weren’t able to attend, you can learn more about what you missed here.